Product Overview

Genuine JDM Mazda RX-7 FD3S 13B-REW 1.3L sequential twin-turbo rotary engine with 5-speed RWD manual transmission, imported from Japan.

This package is ideal for an FD3S RX-7 restoration, rotary rebuild, replacement drivetrain, or performance project.

IMPORTANT CONDITION DISCLOSURE: Testing identified low compression in one chamber. Therefore, the engine may require internal rotary-engine repair or rebuilding before installation. Sold AS-IS with no warranty.

• Genuine JDM 13B-REW rotary engine
• Sequential twin-turbo system
• 5-speed RWD manual transmission
• Approximately 60,000 miles listed
• Nationwide freight shipping available
• Sold AS-IS — rebuild/repair candidate

Please review the actual product photos and contact our inventory to verify included components and fitment before ordering.

Product Details

JDM Mazda RX-7 FD3S 13B-REW Twin Turbo Engine with 5-Speed Manual Transmission

Looking for a JDM Mazda RX-7 FD3S 13B-REW engine for sale? our inventory offers this genuine Japanese-market Mazda 13B-REW sequential twin-turbo rotary engine together with a 5-speed RWD manual transmission.

Mazda developed the legendary 13B-REW for the FD3S-generation RX-7. Unlike a conventional piston engine, the 13B-REW uses a compact two-rotor design combined with sequential twin turbochargers. As a result, the engine became one of Mazda’s best-known performance powerplants and remains highly sought after for RX-7 restorations, rotary builds, and performance projects.

This particular drivetrain has a known compression concern. Therefore, please read the condition disclosure below carefully before purchasing.

QUICK DETAILS

• Engine Code: 13B-REW
• Vehicle: Mazda RX-7 FD3S
• Engine Type: Two-rotor rotary
• Displacement: 1.3L / 1308 cc nominal displacement
• Aspiration: Sequential twin turbo
• Fuel: Gasoline
• Cooling: Water-cooled
• Transmission: 5-speed manual
• Drivetrain: Rear-wheel drive (RWD)
• Mileage Listed: Approximately 60,000 miles
• Condition: Used JDM drivetrain / rebuild candidate
• Compression: compression detected in one chamber
• Warranty: Sold AS-IS — no warranty
• SKU: RX-7 13B-TT K3529

IMPORTANT ENGINE CONDITION DISCLOSURE

This 13B-REW has low compression in one chamber.

Consequently, this engine should be considered a repair or rebuild candidate rather than a guaranteed ready-to-install replacement engine.

Low rotary-engine compression can involve apex seals, side seals, corner seals, rotor housings, or other internal components. However, low compression alone does not establish exactly which component has failed.

Therefore, our inventory does not guarantee that replacing the apex seals alone will correct the condition.

We strongly recommend having the engine inspected and repaired or rebuilt by a technician experienced with Mazda rotary engines before installation.

THIS ENGINE AND TRANSMISSION PACKAGE IS SOLD AS-IS WITH NO WARRANTY.

GENUINE MAZDA 13B-REW ROTARY PERFORMANCE

The Mazda 13B-REW is one of the most recognizable Japanese performance engines of the 1990s.

Its major characteristics include:

• Two-rotor rotary architecture
• 1.3L nominal displacement
• Sequential twin-turbocharging
• Compact and lightweight engine design
• Rear-wheel-drive configuration
• Factory 5-speed manual transmission applications
• Strong enthusiast, restoration, tuning, and motorsports following

Furthermore, the 13B-REW should not be confused with the later naturally aspirated 13B-MSP RENESIS engine found in the Mazda RX-8. The 13B-REW is the factory twin-turbo rotary engine associated with the FD3S-generation RX-7.

MAZDA RX-7 FD3S COMPATIBILITY

This drivetrain is intended for compatible Mazda RX-7 FD3S applications.

JDM FD3S RX-7 production spans different model years and specifications. In addition, differences can exist between Japanese-market and U.S.-market vehicles.

For that reason, buyers installing this JDM 13B-REW into a U.S.-spec RX-7 should verify compatibility before ordering.

Depending on the vehicle, you may need to transfer or modify original components involving:

• ECU and engine management
• Engine wiring
• Sensors
• Emissions equipment
• Intake components
• Turbo-control components
• Vacuum routing
• Fuel-system components
• Exhaust components
• Accessories
• Transmission-related components

Please verify your exact application before purchasing. Do not assume every JDM component is identical to its USDM counterpart.

WHAT’S INCLUDED?

This package includes the major components shown in the actual inventory photographs, including:

• Mazda 13B-REW twin-turbo rotary engine
• Sequential twin-turbo system
• 5-speed RWD manual transmission
• Attached accessories shown
• Wiring and related components shown

Because this is used JDM inventory, the actual product photographs are part of the description.

Please do not assume that an ECU, complete wiring harness, intercooler, downpipe, clutch, flywheel, driveshaft, or any other component is included unless it appears in the photographs or our inventory specifically confirms it.

Contact us before ordering if a particular component is critical to your installation.

WHY BUY A JDM 13B-REW FROM our inventory?

our inventory specializes in imported Japanese engines, transmissions, drivetrains, and performance parts.

When purchasing a rare drivetrain such as an RX-7 FD3S 13B-REW, accurate identification and transparent condition information are especially important. Therefore, we clearly disclose the known low-compression condition of this particular engine.

This package may be an excellent starting point for a buyer specifically searching for:

• Mazda RX-7 13B-REW engine for sale
• JDM RX7 engine and transmission
• FD3S engine replacement
• 13B twin-turbo engine
• RX-7 rotary rebuild project
• 13B-REW restoration drivetrain
• FD3S 5-speed manual drivetrain
• Mazda rotary performance build

INSTALLATION & REBUILD RECOMMENDATIONS

Because this engine has a known compression issue, we recommend diagnosing and rebuilding or repairing the engine as necessary before installation.

A qualified rotary-engine specialist should inspect the relevant internal components, including the sealing system, rotors, housings, and related components.

Additionally, inspect the turbochargers, cooling system, oil system, ignition system, fuel system, vacuum lines, and related components before operating the engine.

After repair or rebuilding, follow the engine builder’s specific break-in procedure. Proper lubrication, cooling-system bleeding, fuel quality, ignition condition, and engine management are especially important for a turbocharged rotary engine.

NATIONWIDE FREIGHT SHIPPING

our inventory can ship this Mazda RX-7 13B-REW engine and transmission package by freight throughout the continental United States.

Commercial addresses with loading docks or forklifts can often simplify freight delivery. Residential and liftgate requirements may affect shipping arrangements and cost.

Please contact our inventory if you need help confirming freight delivery requirements before ordering.

FREQUENTLY ASKED QUESTIONS

What engine is this?

This is a Mazda 13B-REW, the sequential twin-turbo two-rotor rotary engine used in the FD3S-generation Mazda RX-7.

Is this a genuine JDM RX-7 engine?

Yes. This listing is for a JDM Mazda RX-7 FD3S 13B-REW drivetrain imported from Japan.

Is this engine twin turbo?

Yes. The 13B-REW uses a sequential twin-turbo system.

Is this the same engine as the Mazda RX-8?

No. The FD3S RX-7 uses the turbocharged 13B-REW. The later RX-8 uses the substantially different naturally aspirated 13B-MSP RENESIS rotary engine.

Is the 5-speed transmission included?

Yes. This package includes a 5-speed rear-wheel-drive manual transmission as shown in the product photographs.

Does this engine have good compression?

No. This particular engine has low compression in one chamber, and we are disclosing that condition before purchase.

Does it only need apex seals?

We cannot guarantee that. compression may involve apex seals or other internal rotary-engine components. Proper diagnosis and inspection are required to determine the necessary repairs.

Can I install the engine without rebuilding it?

Because of the known low-compression condition, we recommend professional rotary-engine diagnosis and any necessary repairs or rebuilding before installation and operation.

Does this engine come with a warranty?

No. Due to its disclosed condition, this engine and transmission package is sold AS-IS with no warranty.

How many miles does it have?

The current listing shows approximately 60,000 miles.

Will this 13B-REW fit a U.S.-market RX-7?

The 13B-REW belongs to the FD3S RX-7 engine family. However, JDM and USDM differences may require original components to be transferred or modifications to wiring, electronics, emissions equipment, intake, exhaust, or other systems. Verify your exact vehicle before purchasing.

Can you ship this RX-7 engine?

Yes. Nationwide freight shipping is available. Contact our inventory for shipping information and delivery requirements.

BUY A JDM MAZDA RX-7 FD3S 13B-REW ENGINE & 5-SPEED TRANSMISSION

Finding an original JDM Mazda RX-7 FD3S 13B-REW twin-turbo engine with a 5-speed manual transmission has become increasingly important for enthusiasts restoring or building FD-generation RX-7s.

This package offers the desirable 13B-REW rotary drivetrain while clearly disclosing its known low-compression condition. Therefore, it is best suited for a knowledgeable buyer looking for a rebuild, restoration, or performance-project drivetrain.

Known condition: compression in one chamber. Sold AS-IS with no warranty.

Contact our inventory with fitment, component, shipping, or condition questions before purchasing.

Specifications

Fitment & Condition